Get in touch with Wanhui Company
ISO 9001 CERTIFIED
MFPP Containers
MFPP Containers — Mineral-Filled Polypropylene Hinged Lid Food Boxes
Hot-hold-ready, microwave-safe, leak-resistant takeout packaging – manufactured direct by Wanhui across 66 to 99 inch sizes, single and 3-compartment, in black and white.
Up to 40%
Natural mineral content
6×6–9×9″
Four hinged footprints
#5 PP
Recyclable polypropylene
Microwave
Hot & cold safe
20 yrs
Manufacturer-direct supply
OEM
Logo print & custom molds
The Foodservice Packaging Problem MFPP Containers Solve
MFPP containers exist because the two cheap defaults – expanded polystyrene foam and thin standard-PP clamshells – have both run out of road for serious foodservice operators. Foam is now banned outright in a growing list of US states. Thin PP sags and cracks the moment a hot entre or a freezer cycle pushes it past its limit. MFPP is short for mineral-filled polypropylene: a food-grade polypropylene blended with natural mineral filler.
Why operators reach for MFPP
Foam is being legislated out
– buyers who standardized on EPS foam are being forced to re-source under state law, covered in detail below.
Cheap packaging fails in use.
Purchasing teams know the pattern: a container that wins on unit price loses when boxes crumble in the freezer or seams give way in transit.
Hot food needs a stable lid.
A warm sandwich, pasta, or a saucy entre demands a container that holds its shape – not one that softens around the meal.
That is the gap MFPP hinged containers close. They carry hot and cold food, survive the microwave, resist cuts and grease, and stay legal in markets where foam no longer is. Wanhui manufactures these MFPP containers directly – the same blend the major US brands use, sourced from the factory rather than through a distributor markup.
DOC-REF: WH-MFPP-2026
What Is MFPP? Composition, Mineral Filler %, and How It Performs
Mineral-filled polypropylene is a two-part material. A polypropylene resin base provides the food-contact polymer and heat tolerance; a natural mineral filler – most often calcium carbonate (CaCO) – is compounded into that resin before the sheet is thermoformed into a container.
Industry practice puts the mineral load at up to 40% of the container by weight, with roughly 60% polypropylene making up the balance – measurably less plastic per box than an all-resin container, and a more sustainable use of polymer. That ratio is the spec most foodservice MFPP is built to, and it is verifiable across major manufacturers’ own material guides.
Mineral filler is not a cost-cutting shortcut – it changes how the container behaves. Calcium carbonate raises the heat-deflection temperature, which is the technical reason an MFPP box holds its shape against a hot entre while thin unfilled plastic containers tend to sag. Mineral loading also stiffens the wall and improves impact strength, so the container resists cracking when a stack is dropped or a freezer cycle works against it. Calcium carbonate used as a plastics additive is FDA-approved for food-contact applications.
MFPP Composition Breakdown
Polypropylene (PP) resinFood-contact polymer base
~60%
Natural mineral filler (CaCO₃)Raises heat-deflection
Up to 40%
Pigment & additivesProcessing stability
Balance
MFPP Container Advantages — Microwave-Safe, Leak-Proof, Stackable
For restaurants engaged in delivery or takeout, any discussion of material science only becomes meaningful when those materials make it to the service window and the guest. Let’s consider what MFPP can mean for you and your operations.
What MFPP hinged containers do for your service
Restaurants can save money by allowing customers to reheat their meals in the same packaging; it withstands microwave radiation without deforming.
A single container can serve both hot entrées and cold deli Salads, reducing the number of SKUs to stock.
This one-piece construction simplifies operations by eliminating the need for a separate lid, while a tamper-evident closure keeps product safe for transport.
This unique material eliminates the grease-absorption problems common with foam.
Our food containers nest for compact storage and are strong enough for freezer use for meal preparation.
The one-piece design also offers operational efficiencies buyers frequently overlook. By eliminating lids from the assembly process and reducing order discrepancies from mismatched lids, packaging operations run much more smoothly and orders can be fulfilled more efficiently.
The hinge is the part that fails first — so it is engineered first
When designing any hinged container, focus must be placed on the critical living hinge, where the greatest failure can occur. Wanhui containers incorporate the living hinge during the forming process, eliminating a potential failure point from glued or mechanically assembled parts.
The hinged closure, combined with a four-point snap-lock seal, stands up to stacking and delivery service-a key failure point for lesser quality hinged containers.
Ultimately, though, what sells the first order is an airtight, no-leak closure and, above all, a package that doesn’t deliver a greasy mess-in fact, your packaging should be your best delivery salesperson.
MFPP Containers Factory
❮
✕
❮
❯
[SYS-DOC-MFPP]
Wanhui MFPP Hinged Containers — Size Range & Model Selection
High-precision polypropylene hinged storage solutions. Specified in standard 3″ depth with modular compartment configurations for standardized commercial foodservice deployment.
3″
Fixed Depth
1 / 3
Compartments
B & W
Color Core
6×6 hinged (225)
[MOD-225]01
FP × Depth
6″ × 6″ × 3″
Compartments
1
Case Quantity
250 / case
Fit: Burgers, bakery items, single sides
9×6 hinged (205/206)
[MOD-20X]02
◀
▶
FP × Depth
9″ × 6″ × 3″
Compartments
1
Case Quantity
150 / case
Fit: Sandwiches, pasta, rectangular plating
8×8 hinged (881)
[MOD-881]03
FP × Depth
8″ × 8″ × 3″
Compartments
1
Case Quantity
150 / case
Fit: Mid-size single entrées
8×8 3-comp (883)
[MOD-883]04
FP × Depth
8″ × 8″ × 3″
Compartments
3
Case Quantity
150 / case
Fit: Plated meals — entrée plus two sides
9×9 hinged (991)
[MOD-991]05
FP × Depth
9″ × 9″ × 3″
Compartments
1
Case Quantity
150 / case
Fit: Full-size single entrées
9×9 3-comp (993)
[MOD-993]06
FP × Depth
9″ × 9″ × 3″
Compartments
3
Case Quantity
150 / case
Fit: Combo meals, family portions
MFPP vs Foam vs PP vs PET — Spec & Regulatory Comparison
Choosing a takeout container simply means comparing it based on the facts – the data and regulation numbers – instead of the marketing hype. We put MFPP next to the other packaging materials it is most apt to challenge on a foodservice shelf.
| Attribute | MFPP | EPS Foam (PS) | Standard PP | PET |
|---|---|---|---|---|
| Base composition | PP + up to 40% mineral | Expanded polystyrene | 100% PP resin | Polyethylene terephthalate |
| Virgin plastic per unit | Reduced by mineral fill | 100% plastic | Highest (all resin) | 100% plastic |
| Microwave-safe | Yes | No | Yes | No |
| Temperature use | Hot & cold | Cold / warm only | Hot & cold | Cold only |
| Recycling code | #5 PP | #6 PS | #5 PP | #1 PET |
| Grease / cut resistance | High | Low (absorbs) | Medium-high | Medium |
| US foam-ban status | Compliant | Banned in 6+ states | Compliant | Compliant |
| Best use | Hot entrées, deli, meal prep | Phasing out | General takeout | Cold salads, display |
Review the data: the takeout-choice question shifts its context. Operators frequently ask if a MFPP is more costly per unit than foam but they might be surprised to know that foam no longer can be an option for foodservice applications within 7 States: California, Washington, Colorado, Oregon, Virginia and New York.
Because of the State regulatory requirements, a 2028Farewell to Foam Act-backed Federal level 2028 legislation banning of foam for the nation would make its a necessary choice not a competitive option vs other comparable packaging in these marketplaces. Against its current pp competitors,MFPP keeps #5 recyclable content & microwave safe qualities whilereducing the required amount of virgin plastic in each container; against PET it adds microwave capability andhot-food suitability that competitors don’t offer.
6+ states
The following 7States havealready instituted a banon food packaging made from polystyrene foam, with Federal 2028 legislation anticipated. MFPPwill help to satisfy compliance all along the food chain .
Source:Packaging Gateway (US polystyrene foam legislature tracking and legislation), April2025
Applications — Where MFPP Containers Perform Best
MFPP hinged takeout boxes hold their position well wherever food needs to depart the restaurant heat – sometimes travel some miles and on occasion be reheat.MFPP is the product most commonly chosen for menus that need durable heat-retaining takeout boxes:
Operations that rely on MFPP hinged containers
[01]
Restaurants & Quick Serve Chains.
Perfect for keeping hot entrées, hearty salads and warm sandwiches neatly secured and heat-protected on their journey from kitchen to customer.
[02]
Delivery & Take-out Programs.
A smart choice for off-premise ordering, the leak-resistant snap-lock and microwave reheatable design come standard for convenient customer carryout.
[03]
Meal Prep Services.
Stackable, freezer-ready and microwave-approved; one versatile container serves your customers from prepping and freezing through to storing and reheating. For subscription services, we offer dedicated meal prep containers which extend this build to specific lines.
[04]
Catering & Event Services.
Our 3-compartment MFPP options expertly cradle a main entrée and two accompanying sides, ensuring each item stays separate from the others until ready for consumption.
[05]
School & Hospital Canteens.
Suitable for a variety of high-volume institutional catering, our food-grade containers provide secure, single-serving options.
A Deli Service, in a particularly efficient example, demonstratesMFPP’s adaptability:a single SKU in an operation could serve a chilled deli salad earlier in the day, then hold a hot lunch entree at midday – cutting down order processing and storage needs significantly.
Field note: compartment choice drives repeat orders
When packaging combo and family-size meals, a 3-compartment MFPP goes beyond simply portioning ingredients – it actively preserves presentation aesthetics that lead to repeat business and customer sharing.
[DOC-REF: WH-MFPP-QT]
Wholesale MFPP Containers — Pricing, MOQ, Lead Time & OEM Customization
Buying bulk plastic containers in the form of MFPP trays is not like browsing a retail web store. The cost and lead time is influenced not by clicking 'Add to Basket,' but by the following factors:
What drives an MFPP container quote
01
[PARAM: DIMENSION]
Size and compartment-mix
your container dimensions, depth and 1 and 3 component variations establish the cost of tool and the base materials for each container.
02
[PARAM: VOLUME]
Order size
determines your unit costs, and larger consolidations more accurately align with optimized loading of your truck.
03
[PARAM: OEM]
Branding opportunities
if all you need is standard black, or perhaps custom logos printed on your lidded containers or a bespoke container from scratch.
04
[PARAM: AESTHETIC]
Colour
we have stock white and black, but other colours require higher volume orders.
05
[PARAM: LOGISTICS]
Destination market
the type and complexity of paperwork and the transit required affects the delivered cost in Europe, the USA or the Middle East or Asia Pacific.
[CORE: SOURCE]
Wanhui is the Manufacturer
so when you get a quote from us the landed price of your order will be based on your specific container specification, and there is no distributor markup added to factor in. You'll receive a quote based directly on a manufacturing specification.
[SYS-CAPACITY]
The manufacturing capacity behind the quote
Wanhui operates with 20 thermoforming machines producing containers in line with our 6 sheet extruder lines producing more than 30,000kg of sheet daily which becomes 1M units daily.
Because of the volume we handle and our manufacturing in-house, we develop fully custom-molded packaging and brands for you without subcontracting to others; our manufacturing capacity helps us provide consistent lead times even for your repeated MFPP orders.
[PROCEDURE-WARNING]
Before you commit a wholesale order
While it's tempting to choose based solely on unit price, compare suppliers by their quality and reliability - because in take-out packaging the most typical mistake you can make is to purchase based on price, then find you incur great cost later when containers fail.
Ask for your short list samples to be produced in order to perform trials on your delivery process before committing to purchase a standing order.
MFPP Containers Commercial Toolset
Foam Ban Compliance Checker
Quickly verify if your food packaging aligns with regional environmental regulations. Safeguard your commercial supply chain against compliance risks instantly.
Launch Tool
MFPP Size Model Selector
Find the exact container dimensions perfectly matched to your specific catering and food service models. Streamline your commercial procurement process seamlessly.
Launch Tool
Bulk Order Case Estimator
Calculate precise order volumes, shipping cases, and logistics capacity required for large-scale purchasing. Optimize your procurement budget with accurate data.
Launch Tool
Source MFPP Containers Direct From the Factory
Wanhui produce MFPP hinged lid food containers in every size & configuration above - private labeling and global export. Give us your size mix & volume - we will quote it.
MFPP Containers — Frequently Asked Questions
What is an MFPP container?
What is MFPP? A food container based on the polymer Polypropylene mixed with mineral to improve physical and thermal performance and reduce the amount of virgin plastic.
Is MFPP microwave safe?
Yes. polypropylene base which is resistant to heat allows the MFPP containers to be reheated in a microwave without degrading. These are ideal for your hot food and meal prep applications. If it is packaging it may vary per application, refer to your reheatt instructions.
What makes MFPP different from foam and standard PP?
Against EPS foam: It is microwavable, greaseresistant, and permitted in all states that have outlawed foam food containers. Against regular PP: It features standard #5recyclability and microwave safety but includes a mineral fillergreses) to reduce virginresins per container.
Are MFPP containers recyclable and eco-friendly?
MFPP comes with recycling #5 (PP) and the same recycling procedures apply wherever there is a #5 collection process - this access to #5 recycling varies by municipality. Additionally, mineral fillers substitute a proportion of the petroleum based plastics in the bottle/container.
What sizes and compartment options are available?
Wanhui manufactures hinged MFPP containers available in footprint sizes of 66”, 96”, 88”, and 99” at 3” depth, featuring one- and three-compartment configurations and colorations of white and black. In-house mold design and creation allow us to fabricate to customized dimensions as well.
Can MFPP containers go in the freezer?
Yup, I had it both ways hot food and in and out of the freezer, which is part of the reason that ONE container can perform for the purposes of a meal prep company (and be cooked).
Are MFPP containers food-grade and BPA-free?
Yes. All MFPP containers produced by Wanhui are food grade, BPA free, and Odor-free, with the calcium carbonate added being an FDA-approved additive for plastics.
Why is foam being replaced by MFPP?
Expanded polystyrene (EPS) foam takeout food service ware is already prohibited in states including California, Oregon, Washington, Colorado, New York and Virginia. The use of these products in 27 cities and counties through out California has been restricted, and legislation has been introduced at the federal level to implement a nationwide ban of foam food packaging.
What is the MOQ and lead time for wholesale MFPP containers?
Minimum order quantity and lead time: minimum order quantity and lead time will vary depending on your size range, volume and branding and engraving range.Wanhui can quote specifically to the requirements of your program rather than giving a standard number to all customers, so please get in touch with us.
Do you offer custom logo printing and OEM on MFPP containers?
Yes, Wanhui has its own facilities to do Brand-LogoPrinting and mold making by inhouse factory.We have 20 sets thermoforming production lines. And we supply OEM MFPP food containers for international chains restaurant business owners, takeaway/delivery service providers and company and institution canteen operators,etc.
